Artiza Ethernet Service Tester

XEST: 10 Gigabit Ethernet Service Tester

XESTはGESTの基本的機能を踏襲し、インタフェースを10GbEワイヤーレートに拡張しています。

Figure 1: XEST-1

XEST PictureXEST Picture

Figure 2: XEST-1 Inside

XEST Inside

XESTの特長:
  1. 広域イーサネット専用のサービステスタです。
  2. 10GbEテスタでは業界最小、最軽量
  3. 加入者宅内ではコネクタをジャックに入れるだけ。開通試験は全てNOCからのリモート制御で実施可能(ローカルでも制御使用可能)
  4. 10GbEのワイヤレートジェネレーションとQoS測定が可能
  5. Webベースのユーザインタフェースで究極の使いやすさを実現
Figure 3: XEST-1 Hardware Architecture

Figure 3: XEST-1 Hardware Architecture

Figure 4: XEST-1 Software Architecture

Figure 4: XEST-1 Software Architecture

Figure 5: LED side of chassis

LED side of chassis

Figure 6: Connector side of chassis

Connector side of chassis

Table 1: XEST-1 Specifications
Parameter Description
Test Port SFP (ETHER-0)
Control Ports RJ-45 (ETHER-1)
RJ-45 (RS-232C)
VLAN IEEE802.1Q
Shaper Algorithm Leaky Bucket (per user)
(IFG: 96 bits / preamble: 7 Bytes / SFD: 1 Byte is included)
Generation Rate 1 kbps - 1,000 Mbps / 1 kbps resolution
Frame Size 64 bytes - 16,000 bytes (fixed or user defined sequence)
Data User Definable
Frequency Accuracy ±25 ppm
Jitter ±1 μsec
MTBF 200,000 hours
Operating Temperature/Humidity 0 to 35°C / 30 to 75 %
Storage Temperature/Humidity -20 to 60 °C / 20 to 90 %
Dimensions 130 mm (W) × 44 mm (H) × 192 mm (D)
Weight 550 g (AC Adaptor not included)
Power AC Adaptor
Table 2: Test Port (ETHER-0) Specifications
Parameter Description
Connector SFP+ MSA
Interfaces 10GBASE-SR (Full Duplex)
10GBASE-LR (Full Duplex)
10GBASE-ER (Full Duplex) (in roadmap)
1000BASE-SX (Full Duplex)
1000BASE-LX (Full Duplex)
100BASE-TX (Full Duplex/Half Duplex)
10BASE-T (Full Duplex/Half Duplex)
MDI / MDI-X Auto MDI / MDIX
(only for 1000BASE-T, 100BASE-TX, 10BAST-T)
SFP+ Interfaces AFBR-703SDZ
AFBR-703ASDZ
10GBASE-SR
AFCT-701SDZ
AFCT-701ASDZ
10GBASE-LR
TBD 10GBASE-ER
SFP Interfaces SFP-850-03 1000BASE-SX
SFP-1310-01
SFP-1310-02
1000BASE-LX
SFP-RJ45-02 10BASE-T
100BASE-TX
1000BASE-T
Table 3: AFBR-703SDZ/AFBR-703ASDZ Specifications
Parameter Description
Interfaces 10GBASE-SR
Connector LC multi-mode (MMF)
Optical Output Power, Average -4.3[OMA] to -1[mean] dBm
Spectral Center Wavelength 840 to 860 nm
Min. Receiver Sensitivity -11.1[OMA] to -1[Pave] dBm
Spectral Center Wavelength 840 to 860 nm
RX_LOS De-assert Level -30[OMA] to -12[OMA] dBm
Table 4: AFCT-701SDZ/AFCT-701ASDZ Specifications
Parameter Description
Interfaces 10GBASE-LR
Connector LC single-mode (SMF)
Optical Output Power, Average -8.2[mean] to 0.5[mean] dBm
Spectral Center Wavelength 1,260 to 1,355 nm
Min. Receiver Sensitivity -10.3[OMA] to 0.5[mean] dBm
Spectral Center Wavelength 1,260 to 1,355 nm
RX_LOS De-assert Level -30[OMA] to -17[OMA] dBm
Table 5: SFP-850-03 Specifications
Parameter Description
Interfaces 1000BASE-SX
Connector LC multi-mode (MMF)
Optical Output Power, Average -9.5 to -4 dBm
Spectral Center Wavelength 830 to 860 nm
Min. Receiver Sensitivity
@BER= 1×10-12
-17 to 0 dBm
Spectral Center Wavelength 770 to 870 nm
RX_LOS De-assert Level -31 to -19 dBm
Table 6: SFP-1310-01/SFP-1310-02 Specifications
Parameter Description
Interfaces 1000BASE-LX
Connector LC single-mode (SMF)
LC multi-mode (MMF)
Optical Output Power, Average -9.5 to -3 dBm (SMF)
-11.5 to -3 dBm (MMF)
Spectral Center Wavelength 1,280 to 1,345 nm
Min. Receiver Sensitivity
@BER= 1×10-12
-20.5 to -3 dBm
Spectral Center Wavelength 1,270 to 1,355 nm
RX_LOS De-assert Level -29.5 to -20.5 dBm
Table 7: SFP-RJ45-02 Specifications
Parameter Description
Interfaces 1000BASE-T / 100BASE-TX / 10BASE-T
Connector RJ45
MDI / MDIX Auto MDI / MDIX
Table 8: ETHER-1 Port Specifications
Parameter Description
Connector Modular Jack Connector (RJ45)
Interfaces 100BASE-TX (Full Duplex / Half Duplex)
10BASE-T (Full Duplex / Half Duplex)
MDI / MDIX Auto MDI / MDIX